Search

Products

Integrated screw Air Compressor
Direct Driven Screw Air Compressor
VSD Screw Air Compressor
PM VSD Screw Air Compressor
Gasoline Driven Air Compressor
Drilling rig

 

Belt Screw Air Compressor
Water Cooling Screw Air Compressor
Piston Air Compressor
Air Dryer
Air Tank
Spare parts

Contact

Phone:+86 371 23323377

Add:Wangkoushe Village, Beijiao Township, 
Longting Area, Kaifeng, Henan, China. 475000

Messages

Copyright © 2017 JN compressor.com All Rights Reserved.    ICP:17034388-1

>
>
How to maintain the screw air compressor?
Company News
Exhibition News
Product News

How to maintain the screw air compressor?

The screw air compressor is a positive displacement gas compressor, which increases the gas pressure by reducing the working volume. The screw air compressor is also paid attention to in various indus

The screw air compressor is a positive displacement gas compressor, which increases the gas pressure by reducing the working volume. The screw air compressor is also paid attention to in various industries due to its high efficiency. The maintenance of the air compressor should also receive attention:

First, the cleaning filter:

When cleaning the filter core, it should be cleaned and then dried, and then placed in the same tank for soaking; if the working environment is bad, the cleaning cycle should be shortened. If the air pollution indicator is on the red line, the air filter pollution is already quite serious. It must be disposed of in time, and the oil filter should be cleaned in time to remove the dirt deposited on the bottom.

 

Second, check the valve:

1. Regularly check whether the air compressor safety valve, temperature control valve, pressure controller and pressure regulating valve are working normally. If there is any abnormality, it must be paid attention immediately;

2. Check whether the air compressor oil pump works normally, check the sealing ring, if it is found to be damaged, it should be replaced in time.

Third, the fuel consumption has increased abnormally:

If the fuel consumption of the machine is significantly increased, the core should be inspected or replaced immediately. Of course, it is also necessary to carry out the technical radial bearing and thrust bearing replacement work when the main engine is overhauled to ensure the stable operation of the air compressor.